Data & Gauges

Extended 12x1.5 to 1/8" NPT Adapter

Our Extended 12x1.5 to 1/8" NPT Adapter is a custom machined extended adapter designed to incorporate a female-end 1/8" NPT thread sensor to a male M12x1.5 thread port.  These adapters are specifically designed for sending units with a probe that...

Fuel Pressure Sensor Adapter

For installing a 1/8NPT pressure sensor (Stack, SPA, Motec, etc) in 5/16 or 8mm fuel line typical in BMW applications. Installed on feed side of fuel rail or pressure side of fuel pressure regulator, depending on model. Kit includes barbed end T fitting...

Military-Grade Momentary Button Switch

Momentary (non-latching) single-pole push-button switches for scrolling through dash pages, push-to-talk radio, alarm clear, pit lane speed limiter, etc. Solder connectors, rolling seals, and corrosion-resistant aluminum/stainless/plastic construction...

Military-Grade Momentary Button Switch - Blue

Military-Grade Momentary Button Switch - Green

Military-Grade Momentary Button Switch - Red

Military-Grade Momentary Button Switch - Yellow

3AN Brake Pressure Sensor Tap Point

If you are adding a 1/8" NPT brake pressure sensor to your data system you need a tee point for your stock brake line. This kit is the cleanest way to accomplish the task.Will require cutting and reflaring of your line (37 degree flare - special tool not...

4AN Brake Pressure Sensor Tap Point

If you are adding a 1/8" NPT brake pressure sensor to your data system you need a tee point for your stock brake line. This kit is the cleanest way to accomplish the task.Will require cutting and reflaring of your line (37 degree flare - special tool...

AiM E46 Data Logger Mounting Bracket for MXL2 / MXS / MXL Strada

Attractive, versatile, and strong, this water-Jet cut and black anodized mounting bracket mounts your AiM MXL2, MXS, or MXL Strada data logger directly to the steering column to sit perfectly in the cutout of your racing wheel, making for direct line of...

Steering Wheel Four Button Holder Plate Kit, Carbon Fiber (1-piece)

Sturdy, anodized carbon fiber plates mount between any 6-bolt racing wheel and hub for installing radio, pit lane speed limit, and dash control buttons.Holes are cut for standard 11/16" round switches. Includes required mounting hardware...

Fuel Level Sender Adapter

Finally! A way to check fuel level on your track car when the cluster is replaced by an AiM dash.The BimmerWorld View - In the past, checking fuel level with AiM required pumping the fuel out or knowing and tracking your usage rate. Crude market...