Bimmerworld

E46 M3 BimmerWorld/CPI Section 1 Rasp Terminator with Crossover

BimmerWorld/CPI Rasp Terminator for the E46 M3 (also for MZ3 and Z4M) is a tuned front section that:Greatly reduce rasp from the S54 engineBalance exhaust pressure for each bank with H-pipe...

E46 M3 Brake Cooling Backing Plate Set

Our BimmerWorld E46 M3 Brake Cooling Backing Plates effectively keep your brakes cool under pressure. The increased cooling prevents boiling fluid and pedal fade and can drastically reduce pad and...

E46 M3 Carbon Headlight Blank - Left

E46 M3 Carbon Headlight Blanks were designed because shedding weight is the easiest way to make your car faster, and the more weight you can take off from the front of the car, especially ahead of...

E46 M3 Carbon Headlight Blank - Right

E46 M3 Carbon Headlight Blanks were designed because shedding weight is the easiest way to make your car faster, and the more weight you can take off from the front of the car, especially ahead of...

E46 M3 Carbon Headlight Left Duct Insert

Our E46 M3 Carbon Headlight Left Duct Insert is designed specifically for use with our left Carbon Headlight Blank. This left duct insert is a professional-quality race part, autoclaved for maximum...

E46 M3 Carbon Splitter/Undertray Standoff Kit

E46 M3 PFC Z34 Insulated Rear V2 Stainless Steel Brake Line

With lots of racing years under our belts, the feedback from our team is that most failures in lines occur near the caliper, where the Teflon liner is baked by 1,000F+ rotors radiating heat.  To...

E46 M3 PFC Z34 Rear V2 Stainless Steel Brake Line Kit

As in any performance application, replacing squishy rubber parts with a performance piece will increase response and feel - brakes are no different. Stock rubber brake hoses (4-6 per car) expand...

E46 M3 PFC Z45 Front V2 Stainless Steel Brake Line Kit

As in any performance application, replacing squishy rubber parts with a performance piece will increase response and feel - brakes are no different. Stock rubber brake hoses (4-6 per car) expand...

E46 M3 PFC Z45 Insulated Front V2 Stainless Steel Brake Line Kit

With lots of racing years under our belts, the feedback from our team is that most failures in lines occur near the caliper, where the Teflon liner is baked by 1,000F+ rotors radiating heat.  To...

E46 M3 Section 1 BimmerWorld by Magnaflow Racing Y-Pipe

Section: 1Connects: headers to BimmerWorld Racing exhaustDesign: Y-pipeThis Y-pipe is part of our E46 M3 Racing exhaust. It connects our exhaust to the factory exhaust headers. If you bought one of...

E46 M3 Section 2 BimmerWorld by MagnaFlow Racing Resonator

Section: 2, mid pipeConnects: BimmerWorld section 1 Y-pipe to BimmerWorld Racing MufflerDesign: resonatorThis resonator is part of our Racing exhaust system. It fits between the BW section 1 Y-pipe...